Resetting Passwords To Factory Default Values - IBM 8275 User Manual

8275-416 is automatically reset when this command is processed. You are
prompted for confirmation if you want the reset to proceed.
Reset the configuration data to the factory defaults by indicating the particular unit
as shown in Figure 46. You must identify the 8275-416 to reset. None is the default.
Figure 46. Reset Configuration Data to Factory Defaults

Resetting Passwords to Factory Default Values

8275-416 allows you to reset user passwords to factory default values without
powering off. The factory defaults are not restored until the 8275-416 is reset. The
8275-416 is automatically reset when this command is processed. You are
prompted for confirmation if you want the reset to proceed.
Reset the passwords by indicating the particular unit as shown in Figure 47 on
page 59. You must identify the 8275-416 to reset. None is the default.
58
8275-416 User's Guide