Safety Information; Lithium Battery Safety - IBM PCI Cryptographic Coprocessor Installation And Using Manual

Safety Information

DANGER
An electrical outlet that is not correctly wired could place hazardous voltage
on metal parts of the system or the devices that attach to the system. It is the
responsibility of the customer to ensure that the outlet is correctly wired and
grounded to prevent an electrical shock.
Before installing or removing signal cables, ensure that the power cables for
the system unit and all attached devices are unplugged.
When adding or removing any additional devices to or from the system,
ensure that the power cables for those devices are unplugged before the
signal cables are connected. If possible, disconnect all power cables from the
existing system before you add a device.
Use one hand, when possible, to connect or disconnect signal cables to
prevent a possible shock from touching two surfaces with different electrical
potentials.
During an electrical storm, do not connect cables for display stations, printers,
telephones, or station protectors for communication lines.

Lithium Battery Safety

CAUTION:
A lithium battery can cause a fire, an explosion, or a severe burn. Do not
recharge, disassemble, heat above 100 degrees C (212 degrees F), solder directly
to the cell, incinerate, or expose the cell contents to water.
Keep away from children.
Replace only with the part number specified for this product. Use of a different
battery may present the risk of fire or explosion. The battery connector is
polarized: do not attempt to reverse the polarity.
Dispose of the battery according to local regulations.
v