Lldp > Lldp-Med Settings - D-Link DES-1210/ME Series Manual

4 Configuration
DES-1210/ME Series Metro Ethernet Managed Switch User Manual
Figure 4.208 – LLDP > LLDP Remote Port Detailed Table
LLDP > LLDP-MED Settings
This LLDP-MED Settings page is used to configure the LLDP MED power TLV settings.
Figure 4.206 – LLDP > LLDP-MED Settings
From Port / To Port : Specifies the port ranges to be configured.
Power PSE TLV : Specifies to enable or disable the PSE TLV type to indicate the power source equipment.
Click Apply to implement changes made.
128