Lldp-Med - D-Link xstack DES-3810 series Reference Manual

®
xStack
To view the normal LLDP Remote Port information page per port, click the Show Normal button.
After clicking the Show Normal button, the following page will appear:
Click the <<Back button to return to the previous page.

LLDP-MED

LLDP-MED (Media-Endpoint-Discovery) extends the LLDP industry standard to support advanced features on the
network edges with specialized capabilities and LLDP-MED standards-based functionality.
LLDP-MED System Settings
On this page the user can configure the fast start repeat count.
To view the following window, click L2 Features > LLDP > LLDP-MED > LLDP-MED System Settings, as shown
below:
The fields that can be configured are described below:
Parameter
LLDP-MED Log State
Fast Start Repeat
Count (1-10)
Click the Apply button to accept the changes made for each individual section.
LLDP-MED Port Settings
On this page the user can enable or disable transmit LLDP-MED TLVs. Setting non-supported capability shall have no
functional effect and will result in an inconsistent value error returned to the management application. It effectively
disables LLDP-MED on a per-port basis by disabling transmission of capabilities TLV. In this case the remote table's
objects in the LLDP-MED MIB corresponding to the respective port will not be populated.
To view the following window, click L2 Features > LLDP > LLDP-MED > LLDP-MED Port Settings, as shown below:
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Figure 5-119 LLDP Remote Port Information window
Figure 5-120 LLDP-MED System Settings window
Description
Here the user can enable or disable the LLDP-MED Log State.
The repeat count range is from 1 to 10. The default value is 4.
160