12.2.2 Removing an optical disk drive (ODD)
Field Replaceable Unit
(FRU)
Preliminary and concluding steps: Slotted screw driver (only for
Tools:
removing the optical disk drive filler cover)
Installing accessible drives: tool-less
12.2.2.1 Preliminary steps
Before installing an accessible drive, perform the following steps:
Ê Disable BitLocker functionality as described in section
functionality" on page
Ê Remove optical disk media from the drive.
Ê Shut down the server as described in section
page
52.
Ê Disconnect the AC power cord from the system.
Ê Remove the server cover as described in section
page
55.
TX1320 M1
73.
Upgrade and Maintenance Manual
Accessible drives
Hardware: 10 minutes
"Disabling BitLocker
"Shutting down the server" on
"Opening the server" on
245