13.2
Login and Logout
Logging in to the administrator mode
To configure the system or network setting, log in to the administrator mode.
%
In the login page, select [Administrator] and click [Login].
% Enter the administrator password in the page that appears, and then click [OK].
Reference
-
To log in to the user mode as an administrator, select [Administrator] - [Administrator (User Mode)], and
enter the administrator password.
-
Logging in to the administrator mode locks the control panel of this machine, and you will not be able
to use it.
-
Depending on the status of this machine, you may not be able to log in to the administrator mode.
-
If [Prohibited Functions When Authentication Error] in the Administrator Settings is set to [Mode 2] and
an incorrect password is entered the specified number of times, it is no longer possible to log in to the
administrator mode. For details on the Prohibited Functions When Authentication Error parameter, refer
to the [User's Guide Copy Operations].
-
The password entry page varies depending on the machine settings.
VL3622c/VL2822c/VL2222c
13
13-11