Installing a New G700 without an S8300
!
CAUTION:
Before continuing, be sure you have saved translations in Communication
CAUTION:
Manager.
Begin by resetting the system.
To reset the System
1. Telnet to the S8300, log in, and open a SAT session (type sat or dsat).
2. At the SAT prompt, type reset system 4
The system reboots.
3. After the reboot is complete, telnet to the S8300, login, and open a SAT session.
Assigning Node Names and IP Addresses for the LSPs
If the S8300 network configuration includes LSPs, they must be specifiied on the Node Names
screen.
To assign node names
1. At the S8300 SAT prompt, type change node-names ip to open the Node Names
screen.
Example Node Names Screen
change node-names ip
Name
default_________
node-10-lsp
node-11-lsp
__________
__________
__________
2. Enter the name and IP addresses for the LSPs.
3. Press F3 (Enter) when complete.
Administering Network Regions
Before assigning an IP network region to a G700, you must define network region on the IP
Network Region form. After a network region is defined, you can assign it to the various network
elements (servers, gateways, IP phones).
220 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
IP NODE NAMES
IP Address
0__.0__.0__.0__
_______________
192.168.1 _.50_
_______________
192.168.1 _.51_
_______________
___.___.___.
_
_______________
___.___.___.
_
_______________
___.___.___.
_
_______________
Name
___.___.___.___
___.___.___.___
___.___.___.___
___.___.___.___
___.___.___.___
___.___.___.___
Page 1 of 1
IP Address