Using Windows For Ppp Modem Connection (Windows 2000 Or Xp) - Avaya G700 Installation Manual

Note:
Depending on your system, the Connect screen may appear, from which you
Note:
must select Properties.
3. Click the Security tab.
4. Select the Advanced (custom settings) radio button.
5. Check the Show terminal window checkbox.
6. Click the Networking tab.
7. In the Components box, verify that Internet Protocol (TCP/IP) and Client for Microsoft
Networks are both checked.
8. Select Internet Protocol (TCP/IP) and click Properties.
9. Click the Advanced button.
10. Uncheck (clear) the Use default gateway on remote network box.
11. Click OK three times to exit and save the changes.

Using Windows for PPP Modem Connection (Windows 2000 or XP)

Note:
To access the system, you may need RAS access and ASG Mobile access.
Note:
To use Windows for PPP modem connection (Windows 2000 or XP):
1. Return to the Network and Dial-up Connections window and right-click the connection
you just created.
2. Select Connect.
3. Leave the User Name, Password, and Domain fields blank. If the Dial field is blank, enter
the appropriate telephone number.
4. Click the Dial button. When the media server's modem answers, the system displays the
After Dial Terminal window.
5. Log on to the LAN.
a. Enter your remote access login name and password.
b. When the Start PPP Now! message appears, click Done.
The system displays a small double-computer icon in the lower right portion of your
screen.
6. Double click the double-computer icon.
7. The system displays the connection's Dialup Status box.
8. Click on the Details tab.
9. Note the Server IP address.
About Connection and Login Methods
Issue 7 January 2005 55