Avaya G700 Installation Manual page 291

Specify how you want to use this wizard screen
2. Select Configure all services using the wizard.
3. Click Continue through all the screens.
Check for new screens and new fields on existing screens as mentioned in the planning
forms.
Note:
You must click Continue through all the screens whether there are changes or
Note:
not. You do not need to enter Static Network Route information.
4. Click Continue on the Update System screen.
The Updating System Files screen displays each configuration task as it completes. When
done, the screen displays the line All configuration information was entered.
5. Click Close Window.
6. Log on to a Telnet session.
7. Type /opt/ws/drestart 1 4 to capture the configuration data.
You should see the response, Killed.
Upgrading the S8300A
Issue 7 January 2005 291