Administering An S8500 Or S8700 Primary Controller - Avaya G700 Installation Manual

Administering an S8500 or S8700 primary controller

In this case, the S8300 you have installed is configured as an LSP.
!
CAUTION:
This administration applies only to the primary controller that controls the S8300
CAUTION:
LSP that you are installing. The primary controller can be an S8500 or S8700
media server. Do not administer the S8300 LSP. Translations are automatically
copied to the LSP from the primary controller.
Skip this section and go to
primary controller is an S8300.
Note:
Some of the procedures in this section may have been completed previously as
Note:
part of a normal media server installation.
This document covers only the administration of Communication Manager required for the
G700 media gateway to communicate with the primary controller over a customer's network.
For the majority of required administration, see ''Administrator's Guide to Avaya Communication
Manager, 555-233-506,'' or ''Administration for Network Connectivity for Avaya Communication
Manager, 555-233-504.''
In this section, you will use the SAT interface on the primary controller to:
Assigning Node Names and IP Addresses for the C-LANs and LSPs
Administering Network Regions
Assigning LSPs to the Network Regions
Administering IP Interfaces
Administering the LSP Form
Note:
For information on installing the CLAN boards on the S8500 or S8700 port
Note:
networks and complete information on installing an S8700 media server, see the
Installation documentation on the ''Avaya S8300, S8500, and S8700 media
server Library CD, 555-233-825.''
Administering an S8300 primary controller
Administer Communication Manager
on page 170 if the
Issue 7 January 2005 175