Avaya G700 Installation Manual page 68

G700 Installation and Upgrades: Roadmaps and Reference Information
Table 5: Navigational aid for G700 CLI commands (continued)
Command
session <module #>
stack
(from an MGP session)
session icc
(from an MGP session)
session <#>
exit
<command> help
The command-line prompts in an MGP session use the media gateway name that is assigned
when the gateway is configured.
You can telnet to another processor from a current telnet session.
Differences between CLI commands for the G700 and G350 are described in an Application
Note available at the
68 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
Purpose
open a CLI session on
the stack processor
open a CLI session on
the S8300 processor
open a session on the
stack processor in
module (i.e. another
G700)<#> in the stack
close the current
session (and revert to
the previous session)
displays help for
<command>
Avaya Resource Library.
Prompt
P330-1(super)#
craft@<host name>>
P330-<#>(super)#
2 of 2