Avaya G700 Installation Manual page 248
Media gateway and media server
Hide thumbs
Also See for G700:
- Installing and upgrading (808 pages) ,
- Installing manual (768 pages) ,
- Installation and upgrades (734 pages)
Table of Contents
Advertisement
Upgrading an Existing S8300A to R2.2
Note:
For an upgrade, you do not normally need to install a new authentication file (with
Note:
a .pwd extension). However, if one is required, follow the same steps as with a
license file.
Downloading license file and Communication Manager
versions for an LSP
The license file of the S8300 as a Local Survivable Processor must have a feature set that is
equal to or greater than that of the media server that acts as primary controller (an S8300,
S8500, S8700, S8710, or Blade Server). This is necessary so that if control passes to the LSP,
it can allow the same level of call processing as that of the primary controller.
Additionally, the LSP must have a version of Communication Manager that is the same as, or
later than, that of the primary controller.
Note:
The license file requirements of the LSP should be identified in your planning
Note:
documentation.
To download the license file to your laptop
Tip:
Additional documentation on creating license files can be found on the RFA web
Tip:
site: http://rfa.avaya.com.
1. Use Windows File Explorer or another file management program to create a directory on
your laptop for storing license and authentication files (for example, C:\licenses).
2. Access the Internet from your laptop and go to Remote Feature Activation web site,
rfa.avaya.com.
3. Use the System ID, the SAP ID of the customer, or the SAP ID of the switch order to locate
the license and authentication files for the customer.
4. Check that the license and authentication files are complete.
You might need to add the serial number of the customer's G700.
5. If the files are not complete, complete them.
6. Use the download or E-mail capabilities of the RFA web site to download the license and
authentication files to your laptop.
Running the Automatic Registration Tool (ART)
for the INADS IP address, if necessary
This step is necessary only if the configuration of the customer's INADS alarming modem has
changed.
248 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
Advertisement
Table of Contents
