Before Going To The Customer Site; Planning Forms That The Project Manager Provides - Avaya G700 Installation Manual

For LAN connections the TFTP server either can be your laptop or a customer computer on the
LAN.

Before going to the customer site

Perform the following tasks before going to the customer site:

Planning forms that the project manager provides

Getting the serial number of the G700, if necessary
Setting up the TFTP server on your laptop or on a customer PC, if necessary
Installing the Gateway Installation Wizard
Downloading G700 firmware files to your TFTP directory
Planning forms that the project manager provides
The project manager should provide you with forms that contain all the information needed to
prepare for this installation. The information primarily consists of:
IP addresses
Subnet mask addresses
Logins and passwords
People to contact
The type of system
Equipment you need to install
Verify that the information provided by the project manager includes all the information
requested in your planning forms.
Tip:
Appendix B: Information
Tip:
gather the installation and upgrade information.
on page 369
on page 370
Checklists, provides several checklists to help you
Before going to the customer site
on page 370
on page 371
Issue 7 January 2005
on page 370
369