Upgrading an Existing S8300B to R2.x
3. Click on Save and browse to the location on your laptop where you want to save the file.
To view the IA770 patch documentation
1. Under Documentation Library, double click on Latest IA 770 INTUITY AUDIX
Documentation.
2. Double click on View HTM.
3. Double click on Adding and Removing Software Packages.
4. Double click on Adding Software Packages.
This takes you to the window entitled Add Announcement Sets and Other Software
Packages, which contains the instructions for installing the update software.
Completing the upgrade process
(S8300 is the primary controller)
Telnet to the S8300 (primary controller) and open a SAT session:
1.
To check media modules
2.
To enable scheduled maintenance
3.
To busy out trunks
4.
To check for translation corruption
5.
To resolve alarms
6.
To re-enable alarm origination
7.
To back up the system
8.
To restart LSPs (if any)
To check media modules
1. Type list configuration all and press Enter.
2. Verify that the software is communicating with all media modules and that all media
modules are listed in the reports.
3. Make test telephone calls to verify that Communication Manager is working.
To enable scheduled maintenance
1. Type change system-parameters maintenance and press Enter.
2. Ensure that the Start Time and Stop Time fields' administration is the same as before the
upgrade.
364 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
on page 364
on page 364
on page 365
on page 365
on page 365
on page 365
on page 365
on page 365