Chapter 4: Installing A New G700 Without An S8300 - Avaya G700 Installation Manual
Media gateway and media server
Hide thumbs
Also See for G700:
- Installing and upgrading (808 pages) ,
- Installing manual (768 pages) ,
- Installation and upgrades (734 pages)
Table of Contents
Advertisement
Chapter 4: Installing a New G700 without an S8300
This chapter covers the procedures to install the firmware on an new Avaya G700 Media
Gateway without an Avaya S8300 Media Server. The G700 is controlled by an external primary
server running Avaya Communication Manger. The primary server can be an Avaya S8500 or
S8700/S8710 Media Server or an S8300 residing in another G700.
Note:
Procedures to install or upgrade an S8500 or S8700/S8710 Media Server are not
Note:
covered in this document. See Avaya S8300, S8500, and S8700 Media Server
Library, which is on the Avaya Support website (http://www.avaya.com/support)
or on the CD, 555-233-825.
Tip:
The Avaya Gateway Installation Wizard (GIW) performs these tasks
Tip:
automatically
Assigning the IP addresses of the G700 media gateway components
Checking for IP connections
Setting the LSP Transition Points
However, the GIW does not configure an X330 Expansion module. This task you
must still perform manually, as described in:
Configuring an X330 Expansion Module (If Necessary)
Issue 7 January 2005
193
Advertisement
Table of Contents
