Change Node-Names Ip; Change Ip-Interfaces - Avaya CMC1 Installation, Upgrades And Additions

Adding or Removing Hardware

change node-names ip

To administer the circuit pack's node name.
1. At the SAT, type change node-names ip and press RETURN.
The IP Node Names screen appears.
Figure 87: IP Node Names screen (change node-names ip)
change node-names ip
Name
Tiki
cdr_1
default
iolan
lulu_cl1
lulu_cl2
riki
rsat4
rsat5
st10clan#1
st12clan
st12prowler#1
VAL#1
( 12 of 12
Use 'list node-names' command to see all the administered node-names
Use 'change node-names ip xxx' to change a node-name 'xxx' or add a node-name
2. Type a unique name in the Name field.
Note:
This name is recognized only within the switch, and does not need to match the
Note:
node name on the local network.
3. Enter the IP address in the IP Address field.
You can get this information from the network manager.
4. Press ENTER to save the changes.

change ip-interfaces

To administer an IP interface, which associates the circuit pack with an IP address.
1. At the SAT, type change ip-interfaces and press RETURN.
The IP Interfaces screen appears.
264 Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
IP Address
172.22 .22 .79
192.168.22 .63
0 .0 .0 .0
172.22 .22 .68
172.22 .22 .71
172.22 .22 .77
172.22 .22 .20
172.31 .5 .49
172.23 .23 .40
192.168.22 .21
172.22 .22 .67
172.22 .22 .75
172.22 .22 .120
. . .
. . .
. . .
administered node-names are displayed)
IP NODE NAMES
Name
Page 1 of 1 SPE A
IP Address
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .