Avaya G700 Installation Manual page 43

Checklist 4: Task List to Upgrade an Existing G700 with an S8300B (R2.0.x to R2.2.x)
(continued)
Major Tasks
Upgrade the S8300
page 343
Upgrade the G700
Firmware on page 353
Installing IA770 patch (or RFU)
files, if any on page 363
Completing the upgrade
process (S8300 is the primary
controller) on page 364
Subtasks
on Install the Upgrade Software:
- Decide whether to use the Wizard
- Manual installation
- Upgrade S8300
- Make the upgrade permanent
- Install Communication Manager update
(patch), if any
- Install IA770 update (patch), if any
- Decide whether to use the Installation Wizard
If not using the Wizard:
- Verify contents of the tftp directory
- Determine which firmware to install
- Install firmware on the P330 stack processor
-Set Rapid Spanning Tree
- Install firmware on the G700 media gateway
processor
- Install firmware on the media modules
- Install firmware on other G700s in the stack or
network, if any
- Download the update software
- View the update documentation
- Check media modules
- Enable scheduled maintenance
- Busy out trunks
- Check for translation corruption
- Resolve alarms
- Re-enable alarm origination
- Back up system
- Restart LSPs, if any
About the Installation Roadmap and Task Lists
Issue 7 January 2005
2 of 2
43