Chapter 8: Connecting Telephones And Adjunct Systems - Avaya G700 Installation Manual

Chapter 8: Connecting telephones and adjunct
This section provides information on connecting telephones and other adjunct systems. To
install and wire telephones and connect their power supplies, follow the instructions in
Installation and wiring of telephones and power supplies
Complete the telephone installation process
In addition, you may need to install one or more adjunct systems or devices. Follow the
instructions in:
IA 770 INTUITY AUDIX messaging application
INTUITY AUDIX LX messaging system
ASAI co-resident DEFINITY LAN gateway (DLG)
Call center
Avaya Integrated Management
Uninterruptible power supply (UPS)
Terminal server installation
Call detail recording (CDR)
Reliable Data Transport Tool (RDTT) package
Printers
DS1/T1 CPE loopback jack
External modems
Busy tone disconnect equipment for non-U.S. installations
Music-on-hold
Paging and announcement equipment
Adjunct Information Sources
For these adjunct systems, consult the documentation specific to the system for complete
installation instructions.
Your planning documentation specifies the equipment you will be installing.
!
WARNING:
To reduce the risk of fire, use only 26 AWG or larger telecommunication line
WARNING:
cords when installing telephones or adjuncts.
systems
on page 408
on page 417
on page 431
on page 436
on page 437
on page 452
on page 455
on page 401
on page 403
on page 405
on page 411
on page 416
on page 435
on page 459
on page 460
on page 384
on page 406
on page 454
Issue 7 January 2005 383