Avaya G700 Installation Manual page 42

G700 Installation and Upgrades: Roadmaps and Reference Information
Checklist 4
Upgrade an Existing G700 with an
S8300B to R2.2.x
Use Checklist 4 to upgrade a G700 Media Gateway with the following characteristics:
The G700 has an S8300B Media Server configured as the primary controller.
or,
The G700 has an S8300B Media Server configured as an LSP and is controlled by either
an S8300, S8500, or S8700/S8710 Media Server.
You will use Chapter 6 with this checklist. For help with connecting to and logging in to the G700
or S8300, see
Checklist 4: Task List to Upgrade an Existing G700 with an S8300B (R2.0.x to R2.2.x)
Major Tasks
Before going to the customer
site on page 319
On-site Preparation for the
Upgrade
42 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
About connection methods
on page 326
in this chapter.
Subtasks
- Get planning form
- Get the G700 serial number
- Check number of allocated ports
- Check FTP server for back up
- Get software/firmware files
- If using IA770, obtain update and language
files, if any
- Complete the RFA process
- Obtain static craft password
- Download update (Patch) software to laptop, if
necessary
- Pre-Upgrade tasks — If the Target S8300 is the
Primary Controller
- Get IA770 data and stop IA770
- Back up recover system files
- Install new license and authentication files, if
necessary
- Save translations, if new license and/or
authentication files installed
- Transfer files from CD or laptop
1 of 2