Avaya G700 Installation Manual page 281

Note:
Do not restore the system or security backup sets (filenames beginning with "os"
Note:
and "security"). If you backed up the AUDIX data, you will need to restore the
AUDIX backup sets as separate steps. The AUDIX translations, names, and
messages backup set filename begins with "audix-tr-name-msg". The AUDIX
announcement backup set filename begins with "audix-ann".
To configure the server using the Avaya Installation Wizard
If you have upgraded from a pre-1.2 release, you must enter all server configuration
information. You can do this most easily using the Avaya Installation Wizard (IW), which will do
the server configuration and install the license and password files. If you have filled in the
Electronic Pre-installation Worksheet (EPW), the IW will read the configuration data from the
EPW. Otherwise, you will need to enter the configuration data into the IW. When finished with
the Wizard, return to If using IA770:
To configure the server using the Maintenance Web Interface
If you are not using the Installation Wizard, you can enter the configuration information
manually.
1. Select Configure Server on the Maintenance Web Interface menu.
2. Click Continue on the first two screens.
When you get to the screen titled Specify how you want to use this wizard, select
Configure all services using the wizard. Then enter the configuration information on each
configuration screen.
3. When you complete all the new fields, if necessary, click Continue on the Update System
screen.
The Update System screen displays each configuration task as it completes. When done,
the screen displays the line All configuration information was entered.
4. Click Close Window.
5. Log on to a Telnet session.
6. Type /opt/ws/drestart 1 4 to capture the configuration data. You should see the
response, Killed.
Skip to Verifying the time, date, and time zone
on page 307.
on page 288.
Upgrading the S8300A
Issue 7 January 2005 281