Installing Ia770 Update (Patch) Files, If Any - Avaya G700 Installation Manual

Installing a New G700 with an S8300
8. Type reset <module #>
where <module #> is the number of the G700 in the stack.
9. When the reset is finished, type show mm to verify the upgrade.
To release board (if media module was busied out)
1. When the upgrade procedure is complete, go to the SAT session and release the board
Type release board vx
where x is the slot number of the upgraded media module.
2. Verify the response,
Command Successfully Completed
Note:
If you see the response, Board Not Inserted, this means that the media
Note:
module is still rebooting. Wait one minute and repeat the release board
command.
3. Repeat the release board command for each media module that was busied out.

Installing IA770 update (patch) files, if any

Note:
The Avaya Installation Wizard cannot be used for this procedure.
Note:
If IA770 is being used, a post-upgrade update (patch) for IA770 may be required. See the IA770
documentation for procedures to install an update. The update file and documentation can be
found on the Avaya Support Web Site at http://support.avaya.com.
To obtain the post-upgrade update file and documentation
1. On the Avaya Support Web site, double click on Messaging in the list on the left.
2. Scroll down to the INTUITY links and double click on IA 770 INTUITY AUDIX Messaging
Application.
3. Double click on All Documents.
To download the IA770 patch software
1. Under Software Download, double click on IA 770 INTUITY AUDIX Embedded Messaging
Application Patches.
2. Double click on the update file name for this release.
For example, C6039rf+c.rpm.
168 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server