Ia 770 Intuity Audix Installations And S8300 Upgrades For Ia 770 Intuity Audix; Intuity Audix Lx Messaging System - Avaya G700 Installation Manual

IA 770 INTUITY AUDIX installations and S8300
upgrades for IA 770 INTUITY AUDIX
To install an IA 770 INTUITY AUDIX system, you must install the INTUITY AUDIX software.
Depending on the software release (pre-CM2.2), you may also need to install the CWY1 board.
The INTUITY AUDIX software is included in the S8300 software load (the .tar file), but it must
be installed using INTUITY AUDIX installation tools.
To install the IA 770 INTUITY AUDIX system on an S8300 system, you may have to replace the
hard drive of the S8300, replace the S8300 Media Server, and/or upgrade the S8300 software
first. The hard drive and server replacements require a backup of translations to your laptop and
a subsequent restore of translations. See
page 35 for more information on specific installation scenarios.
For complete information on IA 770 INTUITY AUDIX Installations, including the S8300 hard
drive replacement, see the IA INTUITY AUDIX documentation on the Avaya S8300, S8500, and
S8700 Media Server Library CD, 555-233-825, or Avaya IA770 INTUITY AUDIX Messaging,
Release 2.0, Installation, Upgrades, and Troubleshooting, 11-300399. Both of these documents
are included in the IA 770 INTUITY AUDIX Messaging Application Technician Kit

INTUITY AUDIX LX messaging system

The process of integrating an INTUITY AUDIX LX system with an Avaya S8300 Media Server
involves a series of tasks to prepare the switch to work with the INTUITY AUDIX LX system.
The procedures for this process are fully documented in INTUITY AUDIX LX Release 1.0
Documentation, 585-313-818. The information is contained in a document with the title INTUITY
AUDIX LX Release 1.0 LAN Integration with S8300 and DEFINITY
INTUITY AUDIX LX messaging system
About the Installation Roadmap and Task Lists
®
Systems.
Issue 7 January 2005
on
405