Avaya G700 Installation Manual page 273

The Select Installation Media screen
If you see the Select Installation Media screen:
a. Start up the TFTP server on your laptop, or connect a USB CD-ROM drive to one of
the USB ports.
b. Insert the unity CD in the laptop or USB drive.
c. Select either TFTP or CDROM.
d. Select OK, and press Enter.
The Select Release Version screen appears.
The Select Release Version screen
5. Select the appropriate release version (if more than one) then select OK and press Enter.
At this point, the following processes are initiated:
a. The S8300 hard drive is reformatted.
b. The Linux operating system is installed.
c. Once the drive is properly configured, the program begins installing Communication
Manager software and reports the progress.
Upgrading the S8300A
Issue 7 January 2005 273