Before Going To The Customer Site; Upgrading To Release 2.2 (Install Tftp Server Or Obtain Usb Cd-Rom Drive) - Avaya G700 Installation Manual

Installing a New G700 with an S8300

Before Going to the Customer Site

The procedures in this section should be completed before going to the customer site or before
starting a remote installation.
Perform the following pre-installation tasks:

Upgrading to release 2.2 (Install TFTP server or obtain USB CD-ROM drive)

Collecting Upgrade Information
Obtaining update (patch) files, if needed
If using IA770, obtaining update and language files
Completing the RFA process (Obtaining license and password file)
Upgrading to release 2.2 (Install TFTP server or
obtain USB CD-ROM drive)
Upgrading Communication Manager on an S8300 to release 2.2 requires remastering the
S8300B hard drive. After remastering the drive, the remastering program looks for the
Communication Manager software files on:
Your laptop if a TFTP server is installed
or,
An external USB CD-ROM drive
You must have the Avaya TFTP server software installed on your laptop or take a USB
CD-ROM drive to the site. If you do not already have the Avaya TFTP server installed on your
laptop, you can obtain the software from the Avaya Support website and install it as described in
Appendix D: Install the Avaya TFTP
!
Important:
If the new S8300B that you will be installing has Communication Manager
Important:
software installed on its hard drive, you must use an external USB CD-ROM drive
instead of the TFTP server on your laptop. See
page 111.
114 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
Server.
About access to the Unity CD on