Avaya G700 Installation Manual page 139
Media gateway and media server
Hide thumbs
Also See for G700:
- Installing and upgrading (808 pages) ,
- Installing manual (768 pages) ,
- Installation and upgrades (734 pages)
Table of Contents
Advertisement
11. If you clicked the LSP option with an S8500 or S8700/S8710, complete the additional fields
as follows:
CLAN IP address of the primary controller — the IP address of any CLAN board in the
S8700/S8710 media server configuration.
IP address of server 1 (required) — the IP address of the primary S8700/S8710 server.
IP address of server 2 (optional) — the IP address of the duplicated primary S8700/
S8710 server. If server 2 is present, this specific IP address must also be entered.
IP address of secondary server 1 (optional) — the IP address of the secondary S8700/
S8710 server.
IP address of secondary server 2 (optional) — the IP address of the duplicated
secondary S8700/S8710 server
Note:
The CLAN boards must be TN799DP running version 5 or greater firmware. Be
Note:
sure to check the firmware version for these boards on the S8500 or S8700/
S8710. For information on how to upgrade the firmware on the S8500 or S8700/
S8710, please see the section "Upgrade Firmware in Selected Port Cabinet
Packs" in Upgrading the Avaya Media Server Configuration in the S8700/S8710
documentation portion of this documentation CD (Avaya S8300, S8500, and
S8700 Media Server Library CD, 555-233-825).
12. If you clicked the LSP option with an S8300, simply enter the IP address of the S8300
server.
13. Click Continue.
The Ethernet Adjuncts screen appears.
Ethernet Adjuncts Screen
Install the S8300
Issue 7 January 2005
139
Advertisement
Table of Contents
