About Installation And Cabling; Verifying The On-Site Checklist - Avaya G700 Installation Manual

About installation and cabling

The Avaya G700 Media Gateways can be installed in a variety of configurations:
As a standalone unit with one G700
With multiple G700 Media Gateways in a stack
In combinations of Media Gateways and Avaya P330 family devices.
Up to ten G700 Media Gateways and/or Avaya P330s devices can be combined in a single
stack. The G700s can be controlled by an Avaya S8300, S8500, or S8700/S8710 Media Server.
In a typical installation, you arrive at the site equipped with all the tools and information needed
to install a G700 and, possibly, an S8300.
In this section, you complete the following procedures:

Verifying the on-site checklist

Verifying Environmental conditions
Unpacking and checking the order
Installing the G700 media gateway
Cabling multiple units
Attaching Ground Conductors
Note:
When installing a G700, complete all tasks in this chapter to install the gateway
Note:
before doing the media server administration (for example, add
media-gateway).
Verifying the on-site checklist
When you reach the customer's site, verify each item on the Installer's Checklist (see
B: Information Checklists.)
Tip:
It is recommended that you consult with the customer network manager for IP
Tip:
and DNS addressing, as well as for testing the installation.
Also, before proceeding with the installation, you should verify that the proper environmental
and safety conditions exist.
on page 83
on page 84
on page 85
on page 85
on page 96
on page 100
About installation and cabling
Appendix
Issue 7 January 2005 83