Chapter 6: Managing Access Points & Clusters
Session Monitoring
where IPAddressOfAccessPoint is the address of the particular access point you want to
monitor or configure. For standalone access points, this is the only way to navigate to their
configuration information.
6.8
Session Monitoring
The 9160 G2 Wireless Gateway provides real-time session monitoring information includ-
ing which clients are associated with a particular access point, data rates, transmit/receive
statistics, signal strength, and idle time.
6.8.1
Navigating to Session Monitoring
To view session monitoring information, click the Cluster > Sessions tab.
Figure 6.2 Session Monitoring Information
6.8.2
Understanding Session Monitoring Information
The Sessions page shows information on client stations associated with access points in the
cluster. Each client is identified by user name and user MAC address, along with the AP (lo-
cation) to which it is currently connected.
To view a particular statistic for client sessions, select an item from the Display drop-down
list and click Go. You can view information on Idle Time, Data Rate, Signal, Utilization, and
so on; all of which are described in detail in the Table 6.2 on page 63.
A "session" in this context is the period of time in which a user on a client device (station)
with a unique MAC address maintains a connection with the wireless network. The session
begins when the client logs on to the network, and the session ends when the client either
logs off intentionally or loses the connection for some other reason.
62
Psion Teklogix 9160 G2 Wireless Gateway User Manual