Table of Contents
Advertisement
Appendix B: Security Settings on Wireless Clients/RADIUS Server
Configuring WPA/WPA2 Personal (PSK) Security On A Client
. . . then configure WPA/WPA2 Personal (PSK) security on each client as follows.
Table B.16 Association Settings
Network Authentication
Data Encryption
Network Key
The key is provided for
me automatically
Table B.17 Authentication Settings
Enable IEEE 802.1x authentica-
tion for this network
B-30
Psion Teklogix 9160 G2 Wireless Gateway User Manual
WPA-PSK
TKIP or AES depending on how this option is configured on the access point.
Note: When the Cipher Suite on the access point is set to Both, then TKIP clients with a
valid TKIP key and AES clients with a valid CCMP (AES) key can associate with the
access point. For more information, see Online Help on the access point.
Provide the key you entered on the access point Security settings for the cipher suite you are using.
For example, if the key on the access point is set to use a TKIP key of "012345678", then a TKIP client
specify this same string as the network key.
This box should be disabled automatically based on other settings.
Make sure that IEEE 802.1x authentication is disabled (unchecked).
(Setting the encryption mode to WEP should automatically disable authentication.)
Choose WPA-PSK.
Choose either TKIP or AES for the
Data Encryption mode.
Enter a network key that matches
the one specified on the access point
(and confirm by re-typing).
Advertisement
Table of Contents
