Table of Contents
Advertisement
Chapter 10: Configuring Security
Configuring Security Settings
10.2
Configuring Security Settings
To set the security mode, navigate to the Security tab, and update the fields as described
below.
Figure 10.1 Security Settings Page
The following configuration information explains how to configure security modes on the
access point. Keep in mind that each wireless client that wants to exchange data with the
access point must be configured with the same security mode and encryption key settings
consistent with access point security.
On a two-radio AP, these Security Settings apply to both radios.
Note: Security modes other than Plain-text apply only to configuration of the "Internal"
network. On the "Guest" network, you can use only Plain-text mode. (For more infor-
mation about guest networks, see Chapter 14: "Setting Up Guest Access".)
10.2.1 Broadcast SSID, Station Isolation, And Security Mode
To configure security on the access point, select a security mode and fill in the related fields
as described in Table 10.5.
Note: You can also allow or prohibit the Broadcast SSID and enable/disable Station Isola-
tion as extra precautions, as described in Table 10.5 on page 101.
100
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Advertisement
Table of Contents
