Table of Contents
Advertisement
Chapter 11: Maintenance And Monitoring
Ethernet (Wired) Settings
11.1.1 Ethernet (Wired) Settings
The Internal interface includes the Ethernet MAC Address, IP Address, Subnet Mask, and
Associated Network Wireless Name (SSID).
The Guest interface includes the MAC Address, VLAN ID, and Associated Network Wire-
less Name (SSID).
If you want to change any of these settings, click the Edit link.
11.1.2 Wireless Settings
The Radio interface includes the radio Mode, and Channel. Also shown here are MAC ad-
dresses (read-only) and Network Names for the internal and guest interfaces. (See
Chapter 13: "Setting The Wireless Interface" and Chapter 16: "Configuring 802.11 Radio
Settings" for more information.)
If you want to change any of these settings, click the Edit link.
11.2
Event Logs
To view system events and kernel log for a particular access point, navigate to Status >
Events on the Administration Web pages for the access point you want to monitor.
Figure 11.2 Access Point Events
The Events tabbed page allows you to enable or disable Persistence. This page also gives
you the option of enabling a remote "log relay host" to capture all system events and errors
in a Kernel Log. (This requires setting up a remote relay host first. See "Log Relay Host For
122
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Advertisement
Table of Contents
