Table of Contents
Advertisement
Chapter 23: Mini-Controller Configuration
ANSI Emulation
Auto-telnet Without User Action Timing Delay
When this is enabled, the Auto-telnet Without User Action option can be delayed by a speci-
fied time in milliseconds between connect attempts.
Maximum Of Auto-telnet Retries
The number of connection attempts to be made automatically before giving up.
Allow TCP Sessions
When this parameter is enabled, the 9160 G2 allows a mobile computer user to switch
prompts or sessions while at the prompt (either Auto-login or TCP). If Allow TCP Sessions
is disabled, all new sessions will open as Auto-login sessions.
Requesting sessions (normally <CTRL> a on the mobile computer) can be used at the
prompt level to change the type of prompt (if the other type of prompt is available).
Switching sessions at the prompt level is also available (on the mobile computer as
<CTRL> b [next session], or <CTRL> e [last session]). When switching sessions at the
prompt, the mobile computer state (not logged in) will be correctly adjusted to match that of
the switching in session.
The default value is enabled.
298
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Advertisement
Table of Contents
