Table of Contents
Advertisement
Chapter 26: Back Up & Restore Configuration
Update
Note: You must do this for each access point; you cannot upgrade firmware automatically
across the cluster.
Keep in mind that a successful firmware upgrade restores the access point configura-
tion to the factory defaults. (See "Default Settings For The 9160 G2 Wireless
Gateway" on page 27.)
To upgrade the firmware on a particular access point:
1. Navigate to Maintenance > Upgrade on the Administration Web pages for that
access point.
Information about the current firmware version is displayed and an option to upgrade a
new firmware image is provided.
2. If you know the path to the New Firmware Image file, enter it in the New Firmware
Image textbox. Otherwise, click the Browse button and locate the firmware
image file.
Note: The firmware upgrade file supplied must be in the format:
<FileName>.upgrade.tar
Do not attempt to use <FileName>.bin files or files of other formats for the
upgrade—these will not work.
26.6.1 Update
1. Click Update to apply the new firmware image.
Upon clicking Update for the firmware upgrade, a popup confirmation window is dis-
played that describes the upgrade process.
2. Click OK to confirm the upgrade, and start the process
318
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Advertisement
Table of Contents
