Table of Contents
Advertisement
Chapter 22: The 9160 G2 As Base Station
RRM Groups Configuration Settings
Auto-Startup
When this parameter is enabled, the 9160 G2 establishes communication with the RRMs in
this RRM group when it boots, and starts polling automatically. When Auto-Startup is dis-
abled, the 9160 G2 establishes communication with the RRMs in this group when it boots,
but does not start polling in this RRM group until a start polling command is received from
the host. Polling starts if at least one of the RRMs in the RRM group is operating when the
9160 G2 boots.
Shared Channel
If this parameter is enabled, the 9160 G2 checks for other traffic on the radio channel used
by this RRM group, before polling.
If this parameter is disabled, the 9160 G2 assumes that it has exclusive use of the radio
channel for this RRM group, and polls without checking for radio traffic.
This parameter is required for systems installed in the Netherlands.
22.4.2.2 Polling Protocol Parameters
Warning: These parameters are pre-configured for your system, and should not be
changed without a proper understanding of how they affect the radio link.
Number of Poll Windows
This textbox allows the user to specify the number of poll windows in which the RRM
listens for mobile computer responses after sending a poll. The allowable values range from
2 to 4. The default value is 3.
Psion Teklogix 9160 G2 Wireless Gateway User Manual
237
Advertisement
Table of Contents
