Table of Contents
Advertisement
12.1.2.2 Enabling Or Disabling Guest Access
The 9160 G2 Wireless Gateway ships with the Guest Access feature disabled by default. If
you want to provide guest access on your AP, enable Guest access on the Ethernet (Wired)
Settings tab.
Table 12.2 Enabling/Disabling Guest Access
Field
Guest Access
12.1.2.3 Specifying A Virtual Guest Network
If you enable Guest Access, you must create both an "Internal" and "Guest Network" on this
access point virtually, by connecting the LAN port on the access point to a tagged port on a
VLAN capable switch, and then defining two different Virtual LANs on this Administration
page. (For more information, see Chapter 14: "Setting Up Guest Access".) Create the virtu-
ally separate internal and guest LANs as described in Table 12.3.
Table 12.3 Specifying A Virtual Guest Network
Field
Guest
Access
Description
By default, the 9160 G2 Wireless Gateway ships with Guest Access disabled.
• To enable Guest Access, click Enabled.
• To disable Guest Access, click Disabled.
Description
• Select Enabled to enable Guest Access. (If you choose this option, you must select VLANs on the
next setting, For Guest access use, and then provide details on VLAN for the Guest Network on the
rest of the page.)
• Select Disabled to disable Guest Access.
Chapter 12: The Ethernet (Wired) Interface
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Guest Access
139
Advertisement
Table of Contents
