Table of Contents
Advertisement
Chapter 22: "The 9160 G2 As Base Station"
describes how to configure the 9160 G2 Wireless Gateway as either a wired or
wireless Base Station, or as a Remote Radio Module (RRM). This chapter also
describes narrow band radio configuration settings.
Chapter 23: "Mini-Controller Configuration"
describes the configuration of the 9160 G2 Wireless Gateway when used as a
mini-controller.
Chapter 24: "802.IQ Settings"
describes the settings for the 802.IQ proprietary wireless protocol for 9160 G2
base stations and mini-controllers.
Chapter 25: "Network Time Protocol Server"
describes how to configure the 9160 G2 Wireless Gateway to use a specified
Network Time Protocol (NTP) server to synchronize computer clock times on
your network.
Chapter 26: "Back Up & Restore Configuration"
shows how to backup a configuration file that can be used at a later date to
restore the access point to the previously saved configuration.
Chapter 27: "Specifications"
details the physical, environmental, and various operating specifications for the
9160 G2 Wireless Gateway and its radios.
Appendix A: Port Pinouts And Cable Diagrams
includes pinouts and diagrams of the ports and cables for the 9160 G2.
Appendix B: Security Settings on Wireless Clients/RADIUS Server
details how to configure security settings on the client to match the security
mode being used by each network (AP) connection.
Appendix C: Troubleshooting
describes how to solve common problems possibly encountered while updating
network configurations on networks served by multiple, clustered access points.
Appendix D: Glossary
provides definitions and further details on terms featured in bold italics through-
out the manual.
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Chapter 1: Introduction
About This Manual
5
Advertisement
Table of Contents
