2. Connect a regular Ethernet cable from the access point to the LAN.
3. Connect your computer to the LAN either via Ethernet cable or wireless client card.
4.6.2
Test LAN Connectivity With Wireless Clients
Test the 9160 G2 Wireless Gateway by trying to detect it and associate with it from some
wireless client devices. (See "Wireless Client Computers" on page 31 in the PreLaunch
Checklist for information on requirements for these clients.)
4.6.3
Secure And Fine-tune The Access Point Using Advanced Features
Once you have the wireless network up and running and have tested against the access point
with some wireless clients, you can add in more layers of security, add users, configure a
Guest interface, and fine-tune performance settings.
Chapter 4: Quick Steps For Setup And Launch
Test LAN Connectivity With Wireless Clients
Psion Teklogix 9160 G2 Wireless Gateway User Manual
43