Table of Contents
Advertisement
domain-name server. Any host name which can be used at the mobile computer's
TCP> prompt may be used here.
Auto-telnet Without User Action
If this is enabled, the controller will immediately open a connection to the host for each
mobile computer that is initialized, without the user pressing the [ENTER] key.
Enable Virtual Device Names
If this parameter is enabled, the 9160 G2 negotiates with the host to obtain a virtual device
name for the telnet connection.
Configure Device Names
One LU Name is required for each configured mobile computer. This page allows you to
assign LU Names (see also Device Name Prefix, below). The LU Name must be unique and
associated with the mobile computer's Terminal Number. An LU Name can contain a
maximum of 10 alphanumeric characters; lower-case characters are converted to upper-case
upon entry.
Chapter 23: Mini-Controller Configuration
Psion Teklogix 9160 G2 Wireless Gateway User Manual
5250 Emulation
287
Advertisement
Table of Contents
