Table of Contents
Advertisement
Disable Validate server certificate
3
1. Configure the following settings on the Association tab on the Network Properties
dialog.
Table B.4 Association Settings
Network Authentication
Data Encryption
This key is provided for
me automatically
2. Configure this setting on the Authentication tab.
Table B.5 Authentication Settings
EAP Type
Appendix B: Security Settings on Wireless Clients/RADIUS Server
Choose Secured password (EAP-MSCHAP v2)
Open
WEP
Note: An RC4 stream cipher is used to encrypt the frame body and cyclic redundancy
checking (CRC) of each IEEE 802.11 frame. This is the same encryption algorithm as
is used for Static WEP; therefore, the data encryption method configured on the client
for this mode is WEP.
Enable (click to check) this option.
Choose Protected EAP (PEAP).
Psion Teklogix 9160 G2 Wireless Gateway User Manual
IEEE 802.1x Client Using EAP/PEAP
. . . then click Configure
Disable option to automatically
use Windows logon name
and password
4
B-17
Advertisement
Table of Contents
