Guest Interface Settings; Updating Settings - Psion Teklogix 9160 G2 User Manual

Table 12.5 Ethernet Settings For Internal LAN
Field
DNS Nameservers
DNS Domain

12.1.5 Guest Interface Settings

To configure Ethernet (Wired) Settings for the "Guest" interface, fill in the fields as de-
scribed below.
Table 12.6 Configuring Guest Interface Ethernet Settings
Field
MAC Address
VLAN ID
Subnet

12.1.6 Updating Settings

To update Ethernet settings:
1. Navigate to the Ethernet Settings page.
2. Configure the Ethernet settings as required.
3. Click the Update button to apply the changes.
Description
The Domain Name Service (DNS) is a system that resolves the descriptive name (domainname) of a
network resource (for example, www.psionteklogix.com) to its numeric IP address (for example,
66.93.138.219). A DNS server is called a Nameserver.
There are usually two Nameservers; a Primary Nameserver and a Secondary Nameserver.
Identify the domain of the DNS servers.
Description
Shows the MAC address for the Guest interface for the Ethernet port on this access point. This is a read-
only field that you cannot change.
If you choose to configure Internal and Guest networks by "VLANs", this field will be enabled.
Provide a number between 1 and 4094 for the Guest VLAN.
Shows the subnetwork address for the Guest interface. For example, 192.168.1.0.
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Chapter 12: The Ethernet (Wired) Interface

Guest Interface Settings

143