Table of Contents
Advertisement
Appendix B: Security Settings on Wireless Clients/RADIUS Server
Accessing The Microsoft Windows Wireless Client Security Settings
2. From the list of Available networks, select the SSID of the network to which you
B-10
Psion Teklogix 9160 G2 Wireless Gateway User Manual
want to connect and click Configure.
This brings up the Wireless Network Connection Properties dialog with the Associ-
ation and Authentication tabs for the selected network.
List of available networks will change depending on
client location. Each network (or access point) that
that is detected by the client shows up in this list.
("Refresh" updates the list with current information.)
For each network you want to connect to,
configure security settings on the client
to match the security mode being used by
that network.
Note: The exception to this is if the AP is
configured to prohibit broadcast of its network name,
the name will not be show on this list. In that case
you would need to type in the exact network name
to be able to connect to it.
Advertisement
Table of Contents
