Table of Contents
Advertisement
Table 2.1 9160 G2 LED Functions: Front Enclosure
LED
Number
1
2
3
4
5
6
*
LED 1 colour shows orientation of LEDs when viewed from a distance.
2.2.5
Connecting A Video Display Terminal
An ANSI compatible video display terminal (e.g., DEC VT220 or higher), or a PC running
terminal emulation, is used for diagnostic purposes.
The terminal is connected to the RS-232 port on the 9160 G2 (see Figure 2.2.2 on page 21).
This port is normally set to operate at 115,200 baud, 8 bits, 1 stop bit, no parity. To comply
with Part 15 of the FCC rules for a Class B computing device, only the cable supplied (P/N
19387) should be used.
2.3
Changing The Configuration With A Web Browser
The 9160 G2 Flash memory can be reconfigured remotely via the network using a standard
HTML Web Browser such as MS Internet Explorer (version 4.0 or later) or Firefox. See
Chapter 4: "Quick Steps For Setup And Launch" for instructions on changing the parame-
ters and general configuration settings.
Name
Ethernet link
Ethernet activity
1st 802.11 radio status
2nd 802.11 radio status
NB radio status
Power
Function
Link indicator for 10BaseT/100BaseT:
ON = good link; OFF = no link
Ethernet LAN activity (Rx/Tx)
1st 802.11 radio activity (Rx/Tx)
2nd 802.11 radio activity (Rx/Tx)
NB radio activity (Rx/Tx)
LED On solid = Unit powered
LED Off = No power to unit
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Chapter 2: Installation Requirements
Connecting A Video Display Terminal
Colour
*
yellow
green
green
green
green
green
23
Advertisement
Table of Contents
