Table of Contents
Advertisement
•
SpectraLink Voice Priority (SVP).
SpectraLink Voice Priority (SVP) is a QoS approach for Wi-Fi deployments. SVP is an
open specification that is compliant with the IEEE 802.11b standard. SVP minimizes
delay and prioritizes voice packets over data packets on the Wireless LAN, thus increas-
ing the probability of better network performance.
1.5.2.1 The Psion Teklogix 802.IQ Protocol
802.IQ is a Psion Teklogix proprietary protocol that enables mobile computers to operate in
a wireless LAN in a network that supports both TCP/IP and 802.IQ protocols simultane-
ously. 802.IQ protocol is available in two versions: 802.IQ v1 and 802.IQ v2. The 9160 G2
Wireless Gateway can support both versions of the protocol at the same time (mobile com-
puters must use only one).
802.IQ v1 protocol is a wireless LAN routing scheme that provides greater performance in
an 802.11 wireless network than is possible with TCP/IP routing. A mobile computer can
communicate with the 9160 G2 access point using either TCP/IP or 802.IQ v1 protocol,
which makes possible a system with dual operability.
802.IQ v2 protocol is an enhanced version of the 802.IQ v1 protocol that transports packets
over the UDP layer. It provides all the 802.IQ v1 functionality, with the added features of
software upgrade capability over RF, the ability to add third-party access points between
controllers and mobile computers, and integration into the MapRF system if desired.
For further information and configuration menus for 802.IQ, see Chapter 24: "802.IQ
Settings".
1.5.3
Security Features
•
Inhibit SSID Broadcast.
•
Ignore SSID Broadcast.
•
Weak IV avoidance.
•
Wireless Equivalent Privacy (WEP).
•
Wi-Fi Certified for the following standards:
- IEEE Standards: 802.11b, 802.11g, 802.11d
- Security:
WPA™ - Personal
WPA™ - Enterprise
WPA2™ - Personal
WPA2™ - Enterprise
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Chapter 1: Introduction
Security Features
11
Advertisement
Table of Contents
