Table of Contents
Advertisement
Appendix B: Security Settings on Wireless Clients/RADIUS Server
WPA/WPA2 Enterprise (RADIUS) Client Using EAP-TLS Certificate
3
1. Configure the following settings on the Association tab on the Network Properties
dialog.
Table B.13 Association Settings
Network Authentication
Data Encryption
2. Configure these settings on the Authentication tab.
Table B.14 Authentication Settings
Enable IEEE 802.1x authentication for this network
EAP Type
3. Click Properties to bring up the Smart Card or other Certificate Properties dialog
and enable the Validate server certificate option.
B-28
Psion Teklogix 9160 G2 Wireless Gateway User Manual
WPA
TKIP or AES depending on how this option is configured on the access point.
Note: When the Cipher Suite on the access point is set to "Both", then TKIP clients with a
valid TKIP key and AES clients with a valid CCMP (AES) key can associate with the
access point. For more information, see Online Help on the access point.
Enable (click to check)
Validate server certificate
Select (check) the name of certificate
on this client (downloaded from
RADIUS server in a prerequisite procedure)
Enable (click to check) this option.
Choose Smart Card or other Certificate.
Advertisement
Table of Contents
