Table of Contents
Advertisement
Table B.15 Smart Card Or Other Certificate Properties Settings
Validate Server Certificate
Certificates
Click OK on all dialogs to close and save your changes.
4. To complete the client configuration you must now obtain a certificate from the
RADIUS server and install it on this client. For information on how to do this see
"Obtaining A TLS-EAP Certificate For A Client" on page B-35.
Logging On To The Wireless Network With A WPA Client Using A Certificate
WPA clients should now be able to connect to the access point using their TLS certificates.
The certificate you installed is used when you connect, so you will not be prompted for
logon information. The certificate is automatically sent to the RADIUS server for authenti-
cation and authorization.
B.8
Configuring WPA/WPA2 Personal (PSK) Security On A Client
Wi-Fi Protected Access (WPA) with Pre-Shared Key (PSK) is a Wi-Fi Alliance subset of
IEEE 802.11i, which includes Temporal Key Integrity Protocol (TKIP), Advanced Encryp-
tion Algorithm (AES), and Counter mode/CBC-MAC Protocol (CCMP) mechanisms. PSK
employs a pre-shared key for an initial check of client credentials.
If you configured the 9160 G2 Wireless Gateway to use WPA/WPA2 Personal (PSK) secu-
rity mode . . .
Appendix B: Security Settings on Wireless Clients/RADIUS Server
Configuring WPA/WPA2 Personal (PSK) Security On A Client
Enable this option (click to check the box).
In the certificate list shown, select the certificate for this client.
Psion Teklogix 9160 G2 Wireless Gateway User Manual
B-29
Advertisement
Table of Contents
