Table of Contents
Advertisement
Chapter 13: Setting The Wireless Interface
Navigating To Wireless Settings
Wireless Settings describes aspects of the local area network (LAN) related specifically to
the radio device in the access point
(802.11
Mode and Channel) and to the network interface
to the access point
(MAC
address for access point and Wireless Network name, also known
as SSID).
The following sections describe how to configure the "Wireless" address and related set-
tings, including 802.IQv1, on the 9160 G2 Wireless Gateway.
13.1
Navigating To Wireless Settings
To set the wireless address for an access point, navigate to the Manage > 802.11 Settings
tab which will open the Wireless Settings page, and update the fields as described below.
Note: Figure 13.1 shows the Wireless Settings page for a two-radio AP. The Administration
Web page for the single-radio AP will look slightly different.
Figure 13.1 Wireless Settings Configuration
Psion Teklogix 9160 G2 Wireless Gateway User Manual
147
Advertisement
Table of Contents
