Table of Contents
Advertisement
Chapter 15: Configuring VLANs
Configuring VLANs
Table 15.1 Virtual Wireless Network Settings
Field
Virtual Wireless
Network
Enabled
VLAN ID
SSID
162
Psion Teklogix 9160 G2 Wireless Gateway User Manual
necessary, check with the infrastructure support administrator regarding the
VLAN and DHCP configurations.)
Description
You can configure up to 6 VWNs.
You can enable or disable a configured network.
• To enable the specified network, check the Enabled checkbox beside the appropriate VWN.
• To disable the specified network, uncheck the Enabled checkbox beside the appropriate
VWN.
If you disable the specified network, you will lose the VLAN ID you entered.
Provide a number between 1 and 4094 for the Internal VLAN.
This will cause the access point to send DHCP requests with the VLAN tag. The switch and the DHCP
server must support VLAN IEEE 802.1Q frames. The access point must be able to reach the DHCP
server.
Check with the Administrator regarding the VLAN and DHCP configurations.
Enter a name for the wireless network as a character string. This name will apply to all access points on
this network. As you add more access points, they will share this SSID.
The Service Set Identifier (SSID) is an alphanumeric string of up to 32 characters.
Note: If you are connected as a wireless client to the same AP that you are administering,
resetting the SSID will cause you to lose connectivity to the AP. You will need to recon-
nect to the new SSID after you save this new setting.
Advertisement
Table of Contents
