Chapter 18: Load Balancing
Navigating To Load Balancing Settings
18.2
Navigating To Load Balancing Settings
On the Administration UI, navigate to the Manage > Load Balancing tab, and update the
fields as described in the next section.
Figure 18.1 Load Balancing Settings
18.3
Configuring Load Balancing
To configure load balancing, enable Load Balancing and set limits and behaviour to be trig-
gered by a specified utilization rate of the access point.
Notes: Even when clients are disassociated from an AP, the network will still provide
continuous service to client stations if another access point is within range so that
clients can re-connect to the network. Clients should automatically retry the AP
they were originally connected to and other APs on the subnet. Clients who are
disassociated from one AP should experience a seamless transition to another AP
on the same subnet.
182
Psion Teklogix 9160 G2 Wireless Gateway User Manual