Table of Contents
Advertisement
5.3
Provide Network Settings
Table 5.2 Administrator Password And Wireless Network
Field
Current Password
New Password
Confirm New Password
Network Name (SSID)
Note:
The 9160 G2 Wireless Gateway is not designed for multiple, simultaneous configuration changes. If you
have a network that includes multiple access points, and more than one administrator is logged on to the
Administration Web pages and making changes to the configuration, all access points in the cluster will
stay in sync, but there is no guarantee that all configuration changes specified by multiple users will be
applied.
Description
Enter the current administrator password. You must correctly enter the current password before you
are able to change it.
Enter a new administrator password. The characters you enter will be displayed as "
prevent others from seeing your password as you type.
The Administrator password must be an alphanumeric string of up to 8 characters. Do not use special
characters or spaces.
As an immediate first step in securing your wireless network, we recommend that you change
the administrator password from the default.
Re-enter the new administrator password to confirm that you typed it as intended.
Enter a name for the wireless network as a character string. This name will apply to all access points on
this network. As you add more access points, they will share this SSID.
The Service Set Identifier (SSID) is an alphanumeric string of up to 32 characters
Note: If you are connected as a wireless client to the same AP that you are administering,
resetting the SSID will cause you to lose connectivity to the AP. You will need to
reconnect to the new SSID after you save this new setting.
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Chapter 5: Configuring Basic Settings
Provide Network Settings
* "
characters to
49
Advertisement
Table of Contents
