Table of Contents
Advertisement
Chapter 23: Mini-Controller Configuration
5250 Emulation
Figure 23.5 Application Screen With Print Page
Notes:
1. Unlike the Passthru option, when using Host Print no escape commands can
be sent to the printer.
2. Support for printing must be enabled at the mobile computer in its Printer
command under the TESS Features menu; refer to the User Manual of the
relevant mobile computer for more information.
Remote Print
When this parameter is enabled, the 9160 G2 sends the print page to a mobile computer
whenever the mobile computer requests it (by sending the "F17" function key from the
mobile computer, or the "PRINT" key on older mobile computers). The 9160 G2 sends the
function response back to the host.
This is in contrast to Host Print, where the host makes the initial print request.
Note: Support for printing must be enabled at the mobile computer level. Refer to the User
Manual of the relevant mobile computer for more information.
Pages
This parameter determines the number of host screens (or pages) stored at the mobile com-
puter, to a maximum of 79.
278
Psion Teklogix 9160 G2 Wireless Gateway User Manual
1
2
Display Page (8 x 40)
3
4
5
6
7
8
PRINT
9
10
11
Print Page (8 x 40)
12
13
Advertisement
Table of Contents
