Table of Contents
Advertisement
Figure 19.3 Quality Of Service (QoS) Settings
Configuring Quality of Service (QoS) on the 9160 G2 Wireless Gateway consists of setting
parameters on existing queues for different types of wireless traffic, and effectively specify-
ing minimum and maximum wait times (via Contention Windows) for transmission. The
settings described here apply to data transmission behaviour on the access point only, not to
that of the client stations.
Note: For the Guest interface, QoS queue settings apply to the access point load as a whole
(both BSSes together).
On a two-radio access point these settings apply to both radios but the traffic for each
radio is queued independently. (The exception to this is guest traffic as noted below.)
Internal and Guest network traffic is always queued together within each radio. This
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Chapter 19: Quality Of Service (QoS)
Configuring QoS Queues
195
Advertisement
Table of Contents
